$ 43.00
Lance Pilot Drill 1.2mm diameter and Regular overall length (34mm).
Depth marking 6 - 8 - 10 - 11.5 - 13 - 16mm.
Cat No: 4058
$ 43.00
Lance Pilot Drill 1.5mm diameter and Regular overall length (34mm).
Depth marking 6 - 8 - 10 - 11.5 - 13 - 16mm.
Cat No: 4059
$ 43.00
Lance Pilot Drill 1.5mm diameter and Short overall length (31mm). Tip is 13mm long.
Cat No: 4259
$ 59.90
Rotary Tissue Punch for Latch Type Handpieces. Stainless Steel.
Diameter - 3.0 mm.
Cat No: 4056
$ 59.90
Rotary Tissue Punch for Latch Type Handpieces. Stainless Steel.
Diameter - 4.0 mm.
Cat No: 4057
$ 59.90
Rotary Tissue Punch for Latch Type Handpieces. Stainless Steel.
Diameter - 4.5 mm.
Cat No: 4158
$ 59.90
Rotary Tissue Punch for Latch Type Handpieces. Stainless Steel.
Diameter - 5.0 mm.
Cat No: 4159
Sold Out
Set of 4 Rotary Tissue Punches for Latch Type Handpieces. Stainless Steel.
Diameters included: 3.5, 4.0, 4.5, and 5.0mm.
Cat No: 4056/4057/4158/4159
$ 49.00
Trephine Drill With Internal Irrigation.
Available in 3 different diameters:
| Cat No | Inside Diameter | Outside Diameter |
| 4053 | 3mm | 4mm |
| 4054 | 4mm | 5mm |
| 4055 | 5mm | 6mm |
$ 139.90 $ 147.00
Set of 3 Trephine Drills With Internal Irrigation.
Included are 3 drills in different diameters:
| Cat No | Inside Diameter | Outside Diameter |
| 4053 | 3mm | 4mm |
| 4054 | 4mm | 5mm |
| 4055 | 5mm | 6mm |
$ 39.00
Marking Drill With External Irrigation.
Diameter 1.9mm.
Cat No: 4150
$ 47.00
Zest CHAIRSIDE® Trephine Bur is intended to remove a Denture Cap / Denture Attachment Housing from a prosthesis and should only be used on acrylic or PIMM restorations.
Package: 1pcs
Type: Bur - Trephine
Cat No: 09702
$ 50.00
The CHAIRSIDE® Polisher Bur helps polish the surface of overdentures and achieve a smooth, satin finish. Manufactured from high-quality silicon carbide in HP shank, the instrument will help clinicians and dental laboratory technicians address the most frequent overdenture preparation requirements in an easier and faster fashion.
Package: 5-Pack
Type: Bur - Polisher
Cat No: 09580
$ 260.00 $ 279.99
CHAIRSIDE Denture Prep & Polish Kit is an all-inclusive bur kit that helps eliminate many of the current challenges clinicians face while processing overdentures. The Kit equips dental professionals with the essential instruments that are needed to accurately and efficiently pick-up Denture Attachment Housings and Denture Caps chairside or in the laboratory.
The unique Recess Bur, exclusively designed by Zest, incorporates distinct, easy to see depth marks indicating where to stop drilling when processing LOCATOR® Denture Attachment Housings/Caps and SATURNO® Denture Caps into the prosthesis. It quickly creates the exact size recess required, increasing efficiency and decreasing time consuming errors. The comprehensive Denture Prep & Polish Kit includes the following tools:
CHAIRSIDE Undercut Bur
CHAIRSIDE Vent Bur
CHAIRSIDE Trim Bur
CHAIRSIDE Grind Bur
CHAIRSIDE Unique Recess Bur
CHAIRSIDE Polishing Bur
Cat No: 09582
$ 299.00
Product: Broken Screw Extractor Kit
Includes:
1 Manual Centering Device
1 Positioner
1 Claw Reamer Bur
4 Reverse Cutting Bur
Cat No: 680-IQ
With Broken Screw Extractor Kit it is possible to remove a broken screw from an implant if it has not been bonded or damaged during previous attempts to remove it.
The extractor kit includes two types of burs; a claw reamer bur and reverse cutting bur. In addition, the kit includes manual centering devices to hold the burs in place during the procedure. In 90% of cases, the broken screw can be removed easily with the claw reamer bur. However if the broken screw is firmly stucked inside the implant, the reverse cutting bur must be used.
Designed in close cooperation with Rhein83, this kit will work with IQ Implants, Zimmer and all internal hex compatibles.
$ 59.00
Replacement Reverse Cutting Burr for Broken Screw Extractor Kit
Package: 1pc
Catalog No: 680FS-IQ
$ 59.00
Replacement Claw Reamer Burr for Broken Screw Extractor Kit
Package: 1pc
Catalog No: 680FA-IQ
