$ 34.90
Hex Driver Latch Type for Low Speed Contra Angle in 1.25mm (0.05") for prosthetic screws, abutments and implant cover screws. This driver could be used with any system that calls for 1.25mm hex.
Type: Hex Driver, Latch Type, 1.25mm (0.05")
Pack: 1pc
Cat No: 4171
$ 34.90
Hex Driver Latch Type for Low Speed Contra Angle in 1.25mm (0.05") for prosthetic screws, abutments and implant cover screws. This driver could be used with any system that calls for 1.25mm hex.
Type: Hex Driver, Latch Type, 1.25mm (0.05")
Pack: 1pc
Cat No: 4172
$ 64.90
Set of 2 Hex Drivers Latch Type for Low Speed Contra Angle in 1.25mm (0.05") for prosthetic screws, abutments and implant cover screws. Those drivers could be used with any system that calls for 1.25mm hex.
Type: Hex Driver, Latch Type, 1.25mm (0.05")
Pack: 2-Pack
Cat No: 4171-4172
$ 55.00 $ 61.99
The LOCATOR R-Tx .050/1.25mm Hex driver is intended for use with latch-type torque wrenches. Designed for Locator R-Tx, but suitable for any system calling for 1.25mm hex driver.
Total Length: 28mm (shaft length: 12.7mm)
This product is compatible with torque wrenches from:
3i Implant Innovations
Nobel Biocare
Thommen Medical Wrench
This product is NOT compatible with square driver torque wrenches.
Type: Hex Driver, Latch Type, 1.25mm (0.050")
Pack: 1pc
Cat No: 08008
$ 34.90
2.0mm Low Speed Hex driver for dental implants with Narrow 3.0mm Platform.
May be used with Low Speed Latch Contra Angle Handpieces pieces.
Available in 2 sizes.
Cat No | Length |
4376 | Short |
4375 | Long |
$ 34.90
2.5mm Hex Drivers Latch Type for slow speed.
May be used with Low Speed Latch Contra Angle Handpieces or racthets with proper adapter.
Cat No: 4173 - Short (20mm)
Cat No: 4174 - Long (28mm)
Pack: 1pcs
$ 64.90
Set of Two 2.5mm Low Speed Hex Drivers (0.1") Latch Type. Set includes short and long versions.
Cat No: 4173 - Short (20mm)
Cat No: 4174 - Long (28mm)
Pack: 2pcs
$ 55.00
Locator driver go direct from a latch type low speed drive connection to the LOCATOR Implant Abutment. This driver is 23mm long. It allows direct torque tightening of the LOCATOR Implant Abutments. Please note that 20 Ncm is required while optimum seating torque value of 30Ncm will help prevent screw loosening of the LOCATOR Implant Abutment. Genuine Zest product!
Cat No: 08913
$ 55.00
Locator driver go direct from a latch type low speed drive connection to the LOCATOR Implant Abutment. This driver is 29mm long. It allows direct torque tightening of the LOCATOR Implant Abutments. Please note that 20 Ncm is required while optimum seating torque value of 30Ncm will help prevent screw loosening of the LOCATOR Implant Abutment. Made by Zest.
Cat No: 08914