$ 92.00
This product is made by Zest in USA for LOCATOR R-Tx® System only! This means THAT IT WOULD NOT WORK with reg Classic Locator caps - only for R-Tx!!!
Genuine Zest custom Retention Insert Tool for LOCATOR R-Tx®. Dual-Sided Tool for easy insertion and removal of the LOCATOR R-Tx® Retention inserts (caps). Metal slot feature on the back of the Tool allows the clinician to disengage a Retention Insert without the risk of tearing gloves.
System: Zest LOCATOR R-TX®
Type: Essential Tool
Package: 1pcs
Cat No: 30021-01
$ 80.00 $ 84.99
System: Zest LOCATOR R-TX®
Type: Processing Package
Color: Assorted
Package: 2-Pack
Cat No: 30030-01
This product is made by Zest Anchors in USA for LOCATOR R-Tx® System only!
NEW LOCATOR R-Tx® Limited Range (aka Standard) Processing package will all new Inserts, that are intended for patients with 10 degrees or less of implant divergence. In these cases, the Limited Range Inserts provide a tighter, more secure fit for patients wanting more stability!
Package Includes:
2- Metal Housing
2- Laboratory Processing Insert
2- Low Retention Insert Limited Range (Aqua)
2- Medium Retention Insert Limited Range (Magenta)
2- High Retention Insert Limited Range (Gold)
2- Block-out Spacer
All available separately. Abutment shown not included.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and to prevent damage to caps/inserts.
$ 70.00 $ 78.99
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Denture assembly comes with Denture Attachment Housing and Black Processing Insert.
Practical denture attachment housing design features horizontal grooves and flats, that resist vertical rotational movement and channel inside the top of the Housing enhancing pivot range of motion. Pink anodization improves aesthetics in areas of thin denture acrylic.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and prevention of damage to caps.
System: Zest LOCATOR R-TX®
Type: Denture Attachment Housing with Processing Insert
Package: 4-Pack
Cat No: 30013-01
$ 30.00
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Nylon Inserts designed to engage dual retentive surfaces on the exterior of Abutment. This helps prevent debris and plaque accumulation within the drive mechanism from impacting proper seating. New and improved design of caps resists edge deformation. Featuring simple retention values - Zero, Low, Medium and High. All available separately.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and to prevent damage to caps.
System: Zest LOCATOR R-TX®
Retention: Zero
Color: Gray
Package: 4-Pack
Cat No: 30001-01
$ 30.00
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Nylon Inserts designed to engage dual retentive surfaces on the exterior of Abutment. This helps prevent debris and plaque accumulation within the drive mechanism from impacting proper seating. New and improved design of caps resists edge deformation. Featuring simple retention values - Zero, Low, Medium and High. All available separately.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and to prevent damage to caps.
System: Zest LOCATOR R-TX®
Retention: Low
Color: Blue
Package: 4-Pack
Cat No: 30002-01
$ 30.00
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Nylon Inserts designed to engage dual retentive surfaces on the exterior of Abutment. This helps prevent debris and plaque accumulation within the drive mechanism from impacting proper seating. New and improved design of caps resists edge deformation. Featuring simple retention values - Zero, Low, Medium and High. All available separately.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and to prevent damage to caps.
System: Zest LOCATOR R-TX®
Retention: Medium
Color: Pink
Package: 4-Pack
Cat No: 30003-01
Sold Out
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Nylon Inserts designed to engage dual retentive surfaces on the exterior of Abutment. This helps prevent debris and plaque accumulation within the drive mechanism from impacting proper seating. New and improved design of caps resists edge deformation. Featuring simple retention values - Zero, Low, Medium and High. All available separately.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and to prevent damage to caps.
System: Zest LOCATOR R-TX®
Retention: High
Color: Clear
Package: 4-Pack
Cat No: 30004-01
$ 30.00
This product is made by Zest in USA for LOCATOR R-Tx® System only!
NEW LOCATOR R-Tx® Limited Range Inserts are intended for patients with 10 degrees or less of divergence. In these cases, the Limited Range Inserts provide a tighter, more secure fit for those wanting more stability! Featuring simple retention values - Low, Medium and High. All available separately.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and to prevent damage to caps.
System: Zest LOCATOR R-TX®
Retention: Limited Range - High
Color: Gold
Package: 4-Pack
Cat No: 30029-01
$ 30.00
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Nylon Inserts designed to engage dual retentive surfaces on the exterior of Abutment. This helps prevent debris and plaque accumulation within the drive mechanism from impacting proper seating. New and improved design of caps resists edge deformation. Featuring simple retention values - Zero, Low, Medium and High. All available separately.
This products requires Zest LOCATOR R-Tx® Custom Retention Insert Tool (Part No: 30021-01) for proper installation and to prevent damage to caps.
System: Zest LOCATOR R-TX®
Retention: Processing Insert
Color: Black
Package: 4-Pack
Cat No: 30012-01
$ 80.00 $ 84.99
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Abutment Impression Coping for LOCATOR R-Tx®. A stock or custom impression tray meay be used with this coping. Ensure that each recess has enough space for the 5mm height and 6.5mm diameter of the LOCATOR R-Tx® Impression Coping.
System: Zest LOCATOR R-TX®
Type: Impression Coping (5mm H x 6.5mm W)
Package: 4-Pack
Cat No: 30017-01
$ 80.00 $ 86.99
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Abutment Analog for LOCATOR R-Tx®
System: Zest LOCATOR R-TX®
Type: Analog
Package: 4-Pack
Cat No: 30015-01
$ 20.00 $ 24.99
Block out spacer for LOCATOR® and LOCATOR R-Tx® Systems only!
Genuine Zest Block Out Spacers are used for placing around an attachment for processing.
System: Zest LOCATOR® or LOCATOR R-TX®
Type: Block Out Spacer
Package: 4-Pack
Cat No: 08514
$ 34.00 $ 39.99
This product is made by Zest in USA for LOCATOR R-Tx® System only!
Genuine Zest Denture Housing Processing Spacer for LOCATOR R-Tx®.
A Processing Spacer could be used instead of the Denture Attachment Housing during the fabrication of the denture if the clinician prefers to pick up the Denture Attachment Housings chairside. The Processing Spacer creates a recess in the denture to allow for the Denture Attachment Housing to be seated without any interference with the surrounding denture acrylic.
System: Zest LOCATOR R-TX®
Type: Processing Spacer
Package: 4-Pack
Cat No: 30018-01
$ 59.00 $ 60.99
System: Zest Locator® Legacy
Type: Scan Body
Packaging: 4 Pack
Cat No: 09260-4
LOCATOR® Scan Bodies can simplify your overdenture cases in combination with a digital workflow. They can be used intraorally or in a lab setting, saving time and improving efficiency in the digital process by accurately capturing the precise location of the LOCATOR and implant. The scan bodies are designed with the exact dimensions and undercut needed for the LOCATOR Denture Attachment Housings further improving the workflow of 3D printed dentures.
$ 12.00
Protective Disc for placing around attachment for processing. Compatible with most popular systems such as Zest Locators, Locators R-Tx, IQ-Rhein, IQ Ball and mini implants with ball top.
System: IQ Ball, IQ-Rhein
Type: Block Out Spacer/Protective Disc
Package: 10-Pack
Cat No: 100PD-IQ
$ 55.00 $ 61.99
The LOCATOR R-Tx .050/1.25mm Hex driver is intended for use with latch-type torque wrenches. Designed for Locator R-Tx, but suitable for any system calling for 1.25mm hex driver.
Total Length: 28mm (shaft length: 12.7mm)
This product is compatible with torque wrenches from:
3i Implant Innovations
Nobel Biocare
Thommen Medical Wrench
This product is NOT compatible with square driver torque wrenches.
Type: Hex Driver, Latch Type, 1.25mm (0.050")
Pack: 1pc
Cat No: 08008
$ 55.00 $ 61.99
Hand Hex Driver 1.25mm (0.05") for prosthetic components, including Zest Locator R-Tx anchors. This drivers will fit any 4x4 square head wrench. Made in USA by Zest Anchors.
Type: Hand Hex Driver, 1.25mm (0.05")
Total length: 22.6mm
Tip Length: 12.5mm
Cat No: 04936
$ 89.00 $ 100.99
Hand Hex Driver 1.25mm (0.05") for prosthetic components, including Zest Locator R-Tx anchors. This drivers will fit any 4x4 sqaure head wrench. In addition, in comes with the Hand (Thumb) knob, which allows for the driver to be used by hand without the wrench. This knob will accomadate any 4x4 sqaure head drivers. Made in USA by Zest Anchors.
Type: Hand Hex Driver, 1.25mm (0.05")
Tip Length: 6.4mm
Total Length: 16mm
Type: Hand (Thumb) Knob for 4x4 Square top drivers
Pack: 1pc
Cat No: 08007
