$ 119.00
Our new Solid Multi Fix Straight Abutments feature a one-piece design, which built on advantages of screw retained line and allow restoration in various clinical procedures from maxilla and mandible areas to single tooth, partial and full edentulous jaw.
This PREMIUM Kit contains following components:
-Multiunit Abutment
-Open Transfer
-Closed Transfer
-Analog
-Titanium Sleeve
-Plastic Sleeve
-Comfort Cap
-Upper Screw
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing platform (3.5mm-3.8mm). There are 5 available gingiva heights : 1, 2, 3, 4 and 5mm. Abutment features built-in Titanium Fixation Screw. Straight Abutment requires standard 1.25mm hex driver for placement.
Cat No - Shoulder Height
6211S - 1mm
6212S - 2mm
6213S - 3mm
6214S - 4mm
6215S - 5mm
$ 129.00
Our new Solid Multi Fix 17º Angled Abutments feature a one-piece design, which built on advantages of screw retained line and allow restoration in various clinical procedures from maxilla and mandible areas to single tooth, partial and full edentulous jaw.
This PREMIUM Kit contains following components:
-Multiunit Abutment
-Open Transfer
-Closed Transfer
-Analog
-Titanium Sleeve
-Plastic Sleeve
-Comfort Cap
-2 Upper Screws
-Lower Fixation Screw
-Long Positioning Handle
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing platform (3.5mm-3.8mm). There are 2 available gingiva heights : 1mm and 2mm. Angled Abutment requires standard 1.25mm hex driver for placement.
Cat No - Shoulder Height
6221S - 1mm
6222S - 2mm
$ 129.00
Our new Solid Multi Fix 30º Angled Abutments feature a one-piece design, which built on advantages of screw retained line and allow restoration in various clinical procedures from maxilla and mandible areas to single tooth, partial and full edentulous jaw.
This PREMIUM Kit contains following components:
-Multiunit Abutment
-Open Transfer
-Closed Transfer
-Analog
-Titanium Sleeve
-Plastic Sleeve
-Comfort Cap
-2 Upper Screws
-Lower Fixation Screw
-Long Positioning Handle
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing platform (3.5mm-3.8mm). There are 2 available gingiva heights : 1mm and 2mm. Angled Abutment requires standard 1.25mm hex driver for placement.
Cat No - Shoulder Height
6231S - 1mm
6232S - 2mm
$ 39.90
A one-piece design multi-unit abutments system, which built on advantages of screw retained line and allow restoration in various clinical procedures from maxilla and mandible areas to single tooth, partial and full edentulous jaw.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
There are 5 available gingiva heights : 1, 2, 3, 4 and 5mm.
Abutment features built-in Titanium Fixation Screw.
Straight Abutment requires standard 1.25mm hex driver for placement.
| Cat No | Gingiva Height |
| 6211 | 1mm |
| 6212 | 2mm |
| 6213 | 3mm |
| 6214 | 4mm |
| 6215 | 5mm |
$ 69.90
A one-piece design for multi-unit abutments system, which built on advantages of screw retained line and allow restoration in various clinical procedures from maxilla and mandible areas to single tooth, partial and full edentulous jaw.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
17º Angled Abutments have 2 available gingiva heights : 1 and 2mm.
Abutment is packed with Titanium Fixation Screw and special detachable handle to assist during placement.
Abutment requires standard 1.25mm hex driver for attachment.
| Cat No | Gingiva Height |
| 6221 | 1mm |
| 6222 | 2mm |
$ 69.90
A one-piece design for multi-unit abutments system, which built on advantages of screw retained line and allow restoration in various clinical procedures from maxilla and mandible areas to single tooth, partial and full edentulous jaw.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
30º Angled Abutments have 2 available gingiva heights : 1 and 2mm.
Abutment is packed with Titanium Fixation Screw and special detachable handle to assist during placement.
Abutment requires standard 1.25mm hex driver for attachment.
| Cat No | Gingiva Height |
| 6231 | 1mm |
| 6232 | 2mm |
$ 83.60
Analog for our new one-piece design multi-unit abutments.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
Pack of 4pcs. Cat No: 6233
$ 131.60
Closed Tray Impression Transfer for our new one-piece design multi-unit abutments.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
Pack of 4pcs. Cat No: 6242
$ 131.60
Open Tray Impression Transfer for our new one-piece design multi-unit abutments.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
Comes packaged with long screw.
Pack of 4pcs. Cat No: 6241
$ 76.00
Plastic Sleeve for our new one-piece design multi-unit abutments.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
Sleeve placement requires connection screw (Cat No: 6200-1) and standard 1.25mm hex driver. Both not included.
Pack of 4pcs. Cat No: 6201
$ 76.00
Titanium Sleeve without hex (rotational) for our new one-piece design multi-unit abutments.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
Sleeve placement requires connection screw (Cat No: 6200-1) and standard 1.25mm hex driver. Both not included.
Pack of 4pcs. Cat No: 6202
$ 115.60
Comfort Cap for our new one-piece design multi-unit abutments.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
Pack of 4pcs. Cat No: 6200
$ 119.00 $ 179.00
Straight Classic Multiunit Abutment Kit includes following 8 components:
Straight Multiunit Titanium Abutment for Dental Implants with Internal Hex. There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.5/3.75/3.80 mm.
Multiunit abutment requires reg 1.25mm hex driver.
| Cat No | Gingiva Height |
| 6001K | 1mm |
| 6002K | 2mm |
| 6003K | 3mm |
$ 129.00 $ 209.00
Angled Multiunit Titanium Abutment for Dental Implants with Internal Hex. There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.5/3.75/3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6021K | 1mm |
| 6022K | 2mm |
| 6023K | 3mm |
$ 129.00 $ 209.00
Angled Multiunit Titanium Abutment for Dental Implants with Internal Hex. There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.5/3.75/3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6031K | 1mm |
| 6032K | 2mm |
| 6033K | 3mm |
$ 39.90
Classic Straight Multiunit Titanium Abutment for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with anti-rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6001W | 1mm |
| 6002W | 2mm |
| 6003W | 3mm |
$ 64.90
Classic 2pc Angled MultiFix Titanium Abutment 17º for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with anti-rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
MultiFix abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6021W | 1mm |
| 6022W | 2mm |
| 6023W | 3mm |
$ 64.90
Classic 2pc Angled Multiunit Titanium Abutment 30º for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with anti-rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6031W | 1mm |
| 6032W | 2mm |
| 6033W | 3mm |
$ 39.90
Classic Straight Multiunit Titanium Abutment for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6001B | 1mm |
| 6002B | 2mm |
| 6003B | 3mm |
$ 64.90
Classic 2pc Angled Multiunit Titanium Abutment 17º for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6021B | 1mm |
| 6022B | 2mm |
| 6023B | 3mm |
$ 64.90
Classic 2pc Angled Multiunit Titanium Abutment 30º for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6031B | 1mm |
| 6032B | 2mm |
| 6033B | 3mm |
$ 22.00
Analog for our Classic Multiunit Abutments.
Cat No: 6133
$ 29.00
$ 29.00
Transfers for Taking Impressions of Classic Multiunit Abutments with Open Tray.
Cat No: 6141
$ 19.00
Titanium Sleeves without Hex for Classic Multiunit Abutment (Rotational)
Cat No: 6103
$ 25.00
Sold Out
Hex Driver for Classic Multiunit Abutments.
May be used with ratchet wrench or by hand with a knob (sold separately).
| Cat No | Tip Length | Overall Length |
| 6111 | 7mm | 12mm |
| 6112 | 15mm | 20mm |
$ 52.00
Connection Screw for our new one-piece design multi-unit abutments.
System is based on the well proven Standard Internal Hex Platform (SP) and compatible with all brands utilizing this platform.
This screw allows for connection of options to the top of the abutment. Requires standard 1.25mm hex driver.
Pack of 4pcs. Cat No: 6200-1
$ 99.00 $ 110.00
Lot of 5 Analogs for Classic Multiunit Abutments.
Cat No: 6133
$ 319.00 $ 389.40
Lot of 5+1 Angled MultiFix Titanium Abutment 17º or 30º for Dental Implants with Internal Hex in any combination.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Each Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
MultiFix abutment requires special driver (Cat No 6111) and reg hex driver of 1.25mm.
Choose from 6 available choices and e-mail to us when ordering.
| Cat No | Angle and Gingiva Height |
| 6021B | 17º-1mm |
| 6022B | 17º-2mm |
| 6023B | 17º-3mm |
| 6031B | 30º-1mm |
| 6032B | 30º-2mm |
| 6033B | 30º-3mm |
$ 299.00 $ 324.50
Lot of 5 Classic Angled Multiunit Titanium Abutment 17º or 30º for Dental Implants with Internal Hex in any combination.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Each Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with anti-rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver (Cat No 6111) and reg hex driver of 1.25mm.
Choose from 6 available choices and e-mail to us when ordering.
| Cat No | Angle and Gingiva Height |
| 6021W | 17º-1mm |
| 6022W | 17º-2mm |
| 6023W | 17º-3mm |
| 6031W | 30º-1mm |
| 6032W | 30º-2mm |
| 6033W | 30º-3mm |
$ 299.00 $ 324.50
Lot of 5 Angled Classic Multiunit Titanium Abutment 17º or 30º for Dental Implants with Internal Hex in any combination.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Each Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver (Cat No 6111) and reg hex driver of 1.25mm.
Choose from 6 available choices and e-mail to us when ordering.
| Cat No | Angle and Gingiva Height |
| 6021B | 17º-1mm |
| 6022B | 17º-2mm |
| 6023B | 17º-3mm |
| 6031B | 30º-1mm |
| 6032B | 30º-2mm |
| 6033B | 30º-3mm |
$ 119.00 $ 125.00
$ 179.00 $ 195.00
Lot of 5 Straight Multiunit Titanium Abutment for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with anti-rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6001W | 1mm |
| 6002W | 2mm |
| 6003W | 3mm |
$ 179.00 $ 195.00
Lot of 5 Straight Classic Multiunit Titanium Abutment for Dental Implants with Internal Hex.
There are 3 available gingiva heights : 1 mm, 2 mm and 3 mm.
Abutment is packed with 2 Titanium Fixation Screws and Plastic Sleeve with rotational hex.
Compatible with all dental implants with internal hex and regular prosthetic platform - 3.75 - 3.80 mm.
Multiunit abutment requires special driver cat No 6111 and reg hex driver of 1.25mm.
| Cat No | Gingiva Height |
| 6001B | 1mm |
| 6002B | 2mm |
| 6003B | 3mm |
$ 139.00 $ 145.00
Lot of 5 Transfers for Taking Impressions of Classic Multiunit Abutments with Open Tray.
Cat No: 6141
$ 40.00
Scan Body Adapter for Multi-Unit system.
Cat No: 3609
